Facade & exterior3 min read

Re-rendering exterior walls – when is the right time?

Exterior render protects your house from the weather and moisture. Find out which warning signs indicate the need for renovation, how to check the condition of your facade and why spring is the ideal time for rendering work.

Beri Bau AGConstruction, conversion & renovation, Zurich
Re-rendering exterior walls – when is the right time?

The facade is the face of your house and at the same time its most important protective shield. Day after day it stands up to wind, rain, frost and UV radiation. After 30 to 50 years, the traces of this strain inevitably begin to show. But when is the right time to renew the exterior render? In this article you will find out how to assess the condition of your facade correctly and when renovation becomes necessary.

Recognising warning signs on the facade

An intact facade protects the masonry from moisture and environmental influences. When this protection weakens, the building fabric is at risk of consequential damage. Look out for the following warning signs.

Cracks and spalling

Fine hairline cracks are usually harmless at first, but can grow over time. It becomes a problem when water gets in and, when it freezes, breaks off more of the render. Larger cracks and flaking render are clear signs that the exterior render is no longer fulfilling its protective function.

Discolouration and growth

Greenish or black discolouration indicates algae and fungal growth. This is not only unsightly but also attacks the render surface in the long term. White deposits, known as efflorescence, are caused by salts carried to the surface by moisture, and point to moisture problems.

Checking the condition of the facade

With simple tests, you can make an initial assessment of the facade's condition yourself. For a professional assessment, however, you should call in a specialist contractor.

The tapping test

Carefully tap the facade with a rubber mallet. If it sounds hollow, the render has come away from the substrate. These hollow areas can grow and cause the render to break off.

The tape test

Stick a piece of strong adhesive tape to the facade and pull it off sharply. If larger pieces of render stick to it, the adhesion is no longer sufficient and extensive renovation is probably needed.

The best time for rendering work

Exterior render cannot be applied in all weather. Temperatures must be consistently above 5 degrees Celsius, otherwise the render will not set properly. Frost and continuous rain are just as problematic as direct sunlight, which leads to rapid drying and cracking.

Spring from May onwards is therefore the ideal season for facade work. Temperatures are mild, the days are long enough for sufficient drying times and extreme weather is rare. Early autumn is also well suited, as long as there is no risk of frost.

Types of render for exterior facades

The choice of the right render depends on the substrate, the location of the building and the desired properties. Various types of render have proven their worth in Switzerland.

Lime- or cement-based mineral renders are robust, vapour-permeable and inexpensive. They allow moisture to escape from the masonry and are particularly suitable for historic buildings. Silicone resin renders combine water repellency with breathability and are very popular in Switzerland. Synthetic resin renders offer high elasticity and weather resistance, but are less vapour-permeable.

Costs and subsidies

In Switzerland, the cost of rendering a facade is between CHF 60 and 120 per square metre, depending on the type of render, the substrate and the work involved. For an average single-family house with 200 square metres of facade area, total costs of CHF 10,000 to 24,000 are realistic.

If you improve the thermal insulation at the same time as renovating the facade, you can benefit from cantonal subsidy programmes. The combination of new render and modern insulation not only increases living comfort but also reduces heating costs.

Conclusion

A well-maintained facade protects the building fabric and preserves the value of your property. Don't wait until major damage occurs – have the condition of your exterior walls checked regularly. Beri Bau AG is your expert partner for all plastering and rendering work. From the condition analysis and choice of render to professional execution, we support you throughout your facade project.

Contact us for a free, no-obligation consultation and discover our reference projects at beribau.ch/en/references.

Planning a project?

We’ll take a look on site.

After the site visit, you’ll receive a free, no-obligation quote.

AddressBaumackerstrasse 24, 8050 Zürich